The Linksys WAG160N Wireless-N ADSL2+ Router is the all-in-one solution for Internet connectivity. The Linksys ADSL2+ Modem function gives you a blazing fast connection to the Internet, far faster than a dial-up, and without tying up your phone line. The Router function lets you share your high-speed Internet connection with all the PCs in the house.
WAG160N Highlights
- High-speed ADSL2+ Modem gives you a fast, "Always On" connection to the Internet
- Connect your PCs via the built-in Router and 4-port Switch to jump start your Ethernet network and share the Internet throughout the building
- Built-in Wireless-N (802.11n) Access Point also lets you connect without running wires -- far faster than standard Wireless-G
- Wall-mountable
Share files, printers, hard drive space, and other resources by connecting your computers to the WAG160N Gateway via the built-in 4-port 10/100 Ethernet Switch. Attach four wired PCs directly, or connect more hubs and switches to create as big a network as you need.
Or, use the built-in Access Point to connect wireless devices to your network without running cables through the building. The Access Point built into the Linksys WAG160N uses the very latest wireless networking technology, Wireless-N (802.11n). By overlaying the signals of multiple radios, Wireless-N's "Multiple In, Multiple Out" (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area maintaining the wireless connection much farther than standard Wireless-G.
With Wireless-N, the farther away you are, the more speed advantage you get. It works great with standard Wireless-G and -B equipment, but when both ends of the wireless link are Wireless-N, the WAG160N can increase the throughput even more by using twice as much radio band, yielding speeds far faster than standard Wireless-G. But unlike other speed-enhanced technologies, Wireless-N can dynamically enable this double-speed mode for Wireless-N devices, while still connecting to other wireless devices at their respective fastest speeds. In congested areas, the "good neighbor" mode ensures that the Router checks for other wireless devices in the area before gobbling up the radio band.
The Linksys WAG160N protects your data and privacy with up to 256-bit industrial-strength encryption and 802.1x authentication and authorisation. It also has a powerful SPI firewall to protect your computers against intruders and most known Internet attacks. Configuration is a snap with the web browser-based configuration utility.
With the Linksys Wireless-N ADSL2+ Gateway at the heart of your network, you're connected to the future.
WAG160N Features
- All LAN ports support autocrossover (MDI/MDI-X)—no need for crossover cables
- Wall-mountable
- Built-in ADSL modem with G.lite, G.dmt, ADSL2, ADSL2+, ADSL2 L, ADSL2 M, ADSL2+ M, and T1. 413 support
- Enhanced security management functions: Port Filtering, MAC and IP Address Filtering, DMZ Hosting, and NAT Technology
- Wi-Fi Protected Setup
- Supports Static and Dynamic Routing (RIP1 and 2)
- DHCP Server capability to assign IP addresses automatically
- Remote administration and remote upgrades available over the Internet
- E-mail and Web-based Logging of Security Events
- Supports traffic and event logging
- Support for NTP (Network Time Protocol) for Synchronising with a Real-Time Server
- RFC1483, PPPoE and PPPoA encapsulations
Features
- All LAN ports support autocrossover (MDI/MDI-X) - no need for crossover cables
- Built-in ADSL modem with G.lite, G.dmt, ADSL2, ADSL2+, ADSL2 L, ADSL2 M, ADSL2+ M, and T1. 413 support
- Enhanced security management functions: Port Filtering, MAC and IP Address Filtering, DMZ Hosting, and NAT Technology
- Wi-Fi Protected Setup
- Supports Static and Dynamic
- Routing (RIP1 and 2)
- DHCP Server capability to assign
- IP addresses automatically
- Remote administration and remote upgrades available over the Internet
- E-mail and Web-based Logging of Security Events
- Supports traffic and event logging
- Support for NTP (Network Time Protocol) for Synchronizing with a Real-Time Server
- RFC1483, PPPoE and PPPoA encapsulations
Specification
- Standards IEEE 802.11N v2.0, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, g.992.1 (g.dmt), g.992.2 (g.lite), g.992.3, g.992.5, T1.413i2, U-R2 for Annex B
- Ports Power, DSL, Ethernet (1-4)
- Buttons Reset, Wi-Fi Protected Setup
- LEDs Power, Wireless, Ethernet (1-4), DSL, Internet
- Cabling Type CAT 5 UTP, RJ-11, RJ-45
- Number of Antennas 2 Internal
- RF Power (EIRP) in dBm 17
- Antenna Gain in dBi 2
Security Features
- Password-protected Configuration for Web Access
- PAP and CHAP Authentication
- Denial of Service (DoS) Prevention
- Stateful Packet Inspection (SPI) Firewall
- AP Isolation
- Website Blocking by URL Address or Keyword
- Java, ActiveX, Proxy, and Cookie Filtering
- ToD Filter (blocks access by time)
- VPN Passthrough for IPSec, PPTP, and L2TP Protocols
- WPA/WPA2 Personal and Enterprise
- 128, 64 Bits WEP with Passphrase WEP Key Generation
- SSID Broadcast Disable
- Access Restriction by MAC and IP Addresses
Environmental
- Dimensions 202 x 34 x 160 mm (8.0" x 1.3" x 6.3")
- Weight 362 g (12.8 oz)
- Power 12VDC 1A
- Certification FCC, CE, IC-03, Wi-Fi, A-Tick, Telepermit, IDA
- Operating Temp. 0 to 40°C (32 to 104°F)
- Storage Temp. -20 to 70°C (-4 to 158°F)
- Operating Humidity 10 to 85%, Noncondensing
- Storage Humidity 5 to 90%, Noncondensing
Package Contents
- Wireless-N ADSL2+ Gateway; Setup CD-ROM with Linksys EasyLink Advisor (LELA); User Guide on CD-ROM; Ethernet Network Cable; Phone Cable (with Annex A units); Power Adapter
Minimum Requirements
- Computer with a Network Adapter and TCP/IP Protocol installed CD-ROM drive
- Activated ADSL Line and Account Information
- Windows XP or Vista to run the Setup CD
- Internet Explorer 6.0 or Firefox 2.0 for Web-based Configuration (only recommended for advanced users)
|